MTU Library Catalogue

Syndetics cover image
Image from Syndetics

Civil and environmental engineering for the sustainable development goals : emerging issues / edited by Manuela Antonelli and Gabriele Della Vecchia.

Contributor(s): Antonelli, Manuela [editor] | Della Vecchia, Gabriele [editor].
Material type: materialTypeLabelBookSeries: SpringerBriefs in applied sciences and technologyPoliMI SpringerBriefs: Publisher: Cham, Switzerland : Springer Nature, [2022]Copyright date: ©2022Description: 108 pages : illustrations ; 24 cm.Content type: text Media type: unmediated Carrier type: volumeISBN: 9783030995928 (paperback) ; 3030995925 (paperback).Subject(s): Environmental engineering | Geotechnical engineering | Sustainable engineeringDDC classification: 628
Contents:
A risk-based approach for contaminants of emerging concern in drinking water production and distribution chain -- Influence of the collection equipment on organic waste treatment: technical and environmental analyses -- Flood damage assessment to economic activities in the Italian context -- Cold atom interferometry in satellite geodesy for sustainable environmental management -- Autonomous wireless sensors via graded elastic metamaterials -- Limit analysis for masonry vaults and domes of cultural heritage -- Displacement-based design of geosynthetic-reinforced pile-supported embankments to increase sustainability -- Characterization and monitoring of an unstable rock face by microseismic methods.
Summary: This open access volume collects emerging issues in Environmental and Civil Engineering, originating from outstanding doctoral dissertations discussed at Politecnico di Milano in 2021. The advanced innovative insights provided are presented with reference to the relevant sustainable development goals (SDGs), hoping that scientists, technicians and decision makers will find them as a valid support to face future sustainability challenges. Indeed, the fast evolution of our society often falls short in properly taking into consideration its relationship with the environment, which is not only the primary source of any resource and the sink of all the wastes we generate throughout our activities, but also the cause of most of the loading and constraints applied to structures and infrastructures. The lack of a proper consideration of the relationship between the needs of both the society and the environment may lead to strong disequilibria, generating a large amount of threats for a robust, resilient and continuous development. In this perspective, the SDGs set by the United Nations represent the criteria to revise our development model, towards the ability to conjugate different needs to build a safe relation between anthropic activities and the environment. Civil and Environmental Engineering plays a relevant role in providing methods, approaches, risk and impact assessments, as well as technologies, to fulfil the SDGs. Research in these fields may in fact provide technical knowledge and tools to support decision makers and technicians in: (i) planning mitigation and adaptation actions to climate change, extreme weather, earthquakes, drought, flooding and other natural disasters; (ii) designing efficient and sustainable strategies for resources exploitation, minimizing the impact and the unequal distributions; (iii) increasing the safety of structures and infrastructures under exceptional loadings and against the deterioration due to their lifecycle; (iv) adopting a holistic risk management approach and appropriate technologies to reduce pollution and environment deterioration, which increase vulnerability; (v) providing a safe drinking water and sanitation system to protect human health.
Holdings
Item type Current library Call number Status Notes Barcode
General lending MTU Bishopstown Library Lending 628 (Browse shelf(Opens below)) Available MTU Cork Module CIVL6045 - Recommended reading. 00198038
General lending MTU Bishopstown Library Lending 628 (Browse shelf(Opens below)) Available MTU Cork Module CIVL6045 - Recommended reading. 00198037
Total holds: 0

Enhanced descriptions from Syndetics:

This open access volume collects emerging issues in Environmental and Civil Engineering, originating from outstanding doctoral dissertations discussed at Politecnico di Milano in 2021. The advanced innovative insights provided are presented with reference to the relevant sustainable development goals (SDGs), hoping that scientists, technicians and decision makers will find them as a valid support to face future sustainability challenges.

Indeed, the fast evolution of our society often falls short in properly taking into consideration its relationship with the environment, which is not only the primary source of any resource and the sink of all the wastes we generate throughout our activities, but also the cause of most of the loading and constraints applied to structures and infrastructures. The lack of a proper consideration of the relationship between the needs of both the society and the environment may lead to strong disequilibria, generating a large amount of threats for arobust, resilient and continuous development. In this perspective, the SDGs set by the United Nations represent the criteria to revise our development model, towards the ability to conjugate different needs to build a safe relation between anthropic activities and the environment. Civil and Environmental Engineering plays a relevant role in providing methods, approaches, risk and impact assessments, as well as technologies, to fulfil the SDGs. Research in these fields may in fact provide technical knowledge and tools to support decision makers and technicians in: (i) planning mitigation and adaptation actions to climate change, extreme weather, earthquakes, drought, flooding and other natural disasters; (ii) designing efficient and sustainable strategies for resources exploitation, minimizing the impact and the unequal distributions; (iii) increasing the safety of structures and infrastructures under exceptional loadings and against the deterioration due to their lifecycle; (iv) adopting a holistic risk management approach and appropriate technologies to reduce pollution and environment deterioration, which increase vulnerability; (v) providing a safe drinking water and sanitation system to protect human health.

Includes bibliographical references.

A risk-based approach for contaminants of emerging concern in drinking water production and distribution chain -- Influence of the collection equipment on organic waste treatment: technical and environmental analyses -- Flood damage assessment to economic activities in the Italian context -- Cold atom interferometry in satellite geodesy for sustainable environmental management -- Autonomous wireless sensors via graded elastic metamaterials -- Limit analysis for masonry vaults and domes of cultural heritage -- Displacement-based design of geosynthetic-reinforced pile-supported embankments to increase sustainability -- Characterization and monitoring of an unstable rock face by microseismic methods.

This open access volume collects emerging issues in Environmental and Civil Engineering, originating from outstanding doctoral dissertations discussed at Politecnico di Milano in 2021. The advanced innovative insights provided are presented with reference to the relevant sustainable development goals (SDGs), hoping that scientists, technicians and decision makers will find them as a valid support to face future sustainability challenges. Indeed, the fast evolution of our society often falls short in properly taking into consideration its relationship with the environment, which is not only the primary source of any resource and the sink of all the wastes we generate throughout our activities, but also the cause of most of the loading and constraints applied to structures and infrastructures. The lack of a proper consideration of the relationship between the needs of both the society and the environment may lead to strong disequilibria, generating a large amount of threats for a robust, resilient and continuous development. In this perspective, the SDGs set by the United Nations represent the criteria to revise our development model, towards the ability to conjugate different needs to build a safe relation between anthropic activities and the environment. Civil and Environmental Engineering plays a relevant role in providing methods, approaches, risk and impact assessments, as well as technologies, to fulfil the SDGs. Research in these fields may in fact provide technical knowledge and tools to support decision makers and technicians in: (i) planning mitigation and adaptation actions to climate change, extreme weather, earthquakes, drought, flooding and other natural disasters; (ii) designing efficient and sustainable strategies for resources exploitation, minimizing the impact and the unequal distributions; (iii) increasing the safety of structures and infrastructures under exceptional loadings and against the deterioration due to their lifecycle; (iv) adopting a holistic risk management approach and appropriate technologies to reduce pollution and environment deterioration, which increase vulnerability; (v) providing a safe drinking water and sanitation system to protect human health.

MTU Cork Module CIVL6045 - Recommended reading.

This book is licensed under the terms of the Creative Commons Attribution 4.0 International License

(http://creativecommons.org/licenses/by/4.0/)

Open Access

Author notes provided by Syndetics

Manuela Antonelli is professor at Politecnico di Milano, Department of Civil and Environmental Engineering, Italy. Her research activity is mostly addressed to the evaluation of physical-chemical finishing post-treatments alternatives, even based on the use of nanomaterials, for drinking water production and wastewater aiming at reclamation and reuse for irrigation or in the industrial field. These activities are performed in cooperation with private companies and international research groups, collaborating in projects focused on process optimization and rationalization of water usage for a sustainable management of water resources.

Gabriele Della Vecchia is professor at Politecnico di Milano, Department of Civil and Environmental Engineering, Italy. His research activity is mostly addressed to the theoretical and numerical modelling of chemo-hydromechanical processes in geomaterials, including clays, cement-bentonite mixtures and brittle rocks.